Product ID:E 264 H NATURAL M C, 800041
MSDS Date:10/30/1992
FSC:8030
NIIN:00N042116
MSDS Number: BSXNQ

ICI FIBERITE

501 WEST THIRD ST
WINONA, MN 55987
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 507-454-3611;507-452-8051

Preparer: MOLDING COMPOUND

Cage: IO068

ICI FIBERITE

787 WINONA, MN 55987 US

Telephone: 507-454-3611

Cage: IO068

EPOXY RESIN

FIBROUS GLASS; (FIBERGLASS)

RTECS: LK3651000

OSHA PEL 15 MG/M3 DUST (MFR)

ACGIH TLV: 10 MG/M3 DUST

1); (BF*3

CAS: 75-23-0

RTECS: KQ8060000

ANTIMONY OXIDE (SARA III)

CAS: 1309-64-4

RTECS: CC5650000

Fraction By Weight: 1-5%

OSHA PEL 0.5 MG/M3 (SB)

ACGIH TLV: 0.5 MG/M3 (SB)

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:NO INFORMATION IS AVAIL ON THE MIX AS
A WHOLE. THE INFORMATION PRESENTED IS BASED ON EACH OF THE
COMPONENTS PRESENT AT CONCS >1% (O.1% FOR CARCINOGENS). EXPOXY
RESINS: MAY CAUSE IRRIT OF SKIN AND EYES , AND POSS DERMATITIS OR
ALLERGY/MAY CAUSE IRRITATION TO THE EYES, NOSE, AND THROAT.
FIBERGLASS: GLASS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:ANTIMONY OXIDE: GRP 2B (IARC VOL47,
P251, 1989 .
Effects of Overexposure:HLTH HAZ:IS INERT; HOWEVER, ABRASIVE & IRRIT
CHARAC MAY BE NOTED AFTER PARTICULATE CONTACT WITH SKIN OR MUCOUS
MEMBRANES OF THE EYES & NOSE. CATALYST: MAY CAUSE EYE & SKIN IRRIT
ON CONTACT. ANTOMONY O XIDE: IRRITATES EYES, MUCOUS MEMBRANES AND
RESP TRACT AND CAN CAUSE SKIN LESIONS KNOWN AS "ANTIMONY
MEASLES".(SUPP DATA)
Medical Cond Aggravated by Exposure:EXISTING ALLERGIES MAY BE
AGGRAVATED.

First Aid:INHAL:REMOVE TO FRESH AIR. PROVIDE OXYGEN IF NEC. IF NOT
BRTHG, GIVE MOUTH-TO-MOUTH RESUSCITATION. CALL MD. EYES: IRRIGATE
W/WATER FOR A MIN OF 15 MIN. SEEK MED ATTN. SKIN: WASH THORO W/SOAP
& WATER. SEEK MED ATTN IF IRRIT DEVELOPS. WASH CONTAM CLTHG BEFORE
REUSE. INGEST:INDUCE VOMIT IF LRG AMTS ARE INGESTED. NEVER GIVE
ANYTHING BY MOUTH TO OR INDUCE VOMIT ON AN UNCONSCIOUS VICTIM.

Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:CONTAMINATED MATERIAL SHOULD BE PICKED UP AND
DISPOSED OF PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AT OR BELOW 65F. GENERAL: THE
USE OF GLOVES WHEN HANDLING UNCURED MATERIAL IS RECOMMENDED. AVOID
SKIN CONTACT.
Other Precautions:WHEN PROCESSING AT ELEVATED TEMPERATURES, PROVIDE
ADEQUATE VENTILATION TO CONTROL PROCESSING FUMES AND VAPORS.

Respiratory Protection:USUALLY NOT NEEDED. USE NIOSH/MSHA APPRVD RESP
IF EXPOS LIMITS ARE EXCEEDED. IN THE ABSENCE OF ADEQ GENERAL/LOCAL
VENT, PROVIDE NIOSH/MSHA APPRVD RESP TO MIN EXPOS TO GAS, VAPS, OR
FUMES RELEASTED DUR ING LAY UP MOLDING OPERATIONS.
Ventilation:PROVIDE GOOD GEN &/OR LOC EXHST VENT TO CONTROL AIRBORNE
LEVELS BELOW THE EXPOSURE LIMITS, PARTICULARLY WHERE(SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOGG&FULL LENGTH FSHLD .
Other Protective Equipment:CLEAN BODY-COVERING CLOTHING TO PREVENT
EXPOSURE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VENT: GRINDING OR HEATING OPERATIONS OCCUR. EFTS OF OVEREXP: CHRONIC
ANTIMONY OXIDE INHAL MAY CAUSE LUNG DISEASE & TUMORS, LIVER DAMAGE
AND BLOOD CHANGES.

HCC:N1
Spec Gravity:1.86-1.92
Appearance and Odor:NATURAL MOLDING MATERIAL, SLIGHT ODOR.
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, STRONG BASES, STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DENSE SMOKE, ACRID VAPORS AND FUMES,
HYDROCARBONS OF VARIABLE COMBUSTION, OXIDES OF CARBON, OXIDES OF
NITROGEN.
Conditions to Avoid Polymerization:CAN OCCUR WITH RAPID OR EXCESSIVE
HEATING.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.